Isocyl A-1


Product description


Bitumen-based bitumen mastic for road and asphalt of Iranian glass wool with the brand name Isocill 1 - A, which is single


It is used in small and small parts, has a polymer composition and high quality for repairing cracks.


Road paving in areas with temperate summers and cold winters.


This product is prepared according to ASTMD 3405-97 standard.


usage


• Streets and roads inside and outside the city in cold regions


• Plane traffic at airports in cold regions


• Classic parking lots and other areas covered with asphalt


Benefits


• Prevent water penetration into the lower layers and thus increase the service life of pavement


• Excellent adhesion to asphalt


• Adequate resistance to weathering


• Maintain all properties at very low and high temperatures


• Excellent reversibility


technical specification


Black color


Type of bitumen base bitumen modified with polymer


1.2 kg density per liter


Medium seam flexibility


Maximum heating temperature 190 degrees Celsius


The mixing temperature in the mixer is 180 ± 5 را C


The temperature of the mixture in the executive equipment is 165-160 degrees Celsius


Working surface temperature - 25 to 80 + degrees Celsius


Package of 16 or 28 kg


Surface preparation


The cracks should be shaved and cleaned according to one of the methods suggested in SHRP H-106.


When sealing, the inside of the cracks should be completely dry and free of dust.


Heating


Mastic in controlled oil baths or double-walled containers with a direct heat mixer up to a temperature of 180 ± 5


Preheat the oven to a homogeneous mixture to pour into the seams.


Procedure


A pump with a pumping device is used for execution and in case of sealing


Partially or with high precision, metal lids with lids for this purpose are used. Operations


Sealing can be performed at ambient temperatures above 4. C.


(The best time to do the sealing is late spring and early summer.)


Safety tips


It is recommended to wear gloves and goggles when working.


Being toxic


Non-toxic





1-2- Isocyl A-2


Product description


Road and asphalt mastic of Iran Glass wool company with the brand name of Isocill A-2


It is used in a small and warm part, according to ASTMD 3905-97 standard, and has a polymer composition and high quality to repair road pavement cracks in areas with very hot summers and mild winters.





usage


• Streets and roads inside and outside the city in hot areas


• Airport traffic at airports in warmer climates


• Floor parking lots and other areas covered with asphalt.


• As a filler and volumetric insulation


Benefits


• Prevent water penetration into the lower layers of road pavement and thus increase the life of asphalt coating for hot areas of garlic.


• Excellent adhesion to asphalt


• Adequate resistance to weathering


• Maintain all properties at very low and high temperatures


• Excellent reversibility


technical specification


Black color


Bitumen modified with polymer


1.2 kg density per liter


60% average seam flexibility


Maximum heating temperature 190 degrees Celsius


The temperature of the mixture in the mixer is 180 ± 5. C


The temperature of the mixture in the executive equipment is 165-160 degrees Celsius


Working surface temperature - 15 to 85 + degrees Celsius


Packaging: 16 or 28 kg packages





Surface preparation


The cracks must be in accordance with one of the methods proposed in SHRP H-106


They should be shaved and cleaned and performed according to the same instructions.


When sealing, the inside of the cracks should be completely dry and free of dust.


Heating


Mastic in controlled oil baths or double-walled containers with mixer to temperature


Heat 180 ± 5 درجه C after direct heat to obtain a homogeneous and pliable mixture.


Procedure


A pumping device with a pump is used to run it and if it is run


Partial or high precision sealing of metal caps with lids for this purpose


Can. Sealing operations can be performed at ambient temperatures above 4. C. (The best time to do the sealing is late spring and early summer.)


Safety predictions


It is recommended to wear gloves and goggles when working. In case of contact


The eyes are immediately rinsed with plenty of water and immediately urgently


Apply medicine.


Being toxic


Non-toxic


1-3- Isocyl A-3


Product description


Road and asphalt mastic for Iranian glass wool with the brand name Isocill A-3


It is used in partial and hot form, it has a combination


Polymer and high quality to repair road pavement cracks in areas with


The summer is mild and the winter is very cold.


This product is made according to the following standards:


ASTM D 3405-97


usage


• Streets and roads in and out of the city located in very cold areas


• Airport traffic at airports


• Floor parking lots and other areas covered with asphalt.


Benefits


• Prevent water penetration into the lower layers of road pavement and thus increase the life of asphalt coating


• Excellent adhesion to asphalt


• Adequate resistance to weathering


• Maintain all properties at very low and high temperatures


• Excellent reversibility


technical specification


Black color


Type of bitumen base bitumen modified with polymer


1.16 kg density per liter


60% average seam flexibility


Maximum heating temperature 195 degrees Celsius


The temperature of the mixture in the mixer is 180 ± 5. C


The temperature of the mixture in the executive equipment is 165-160 degrees Celsius